Decree No. 65 / 2010 Coll.
Decree amending Decree No 352 / 2005 Coll., on the details of the management and financing of electrical equipment and electrical waste (Ordinance on electrical equipment and electrical waste)
Valid
Effective from 31.03.2010
65
DECLARATION
of 3 March 2010
amending Decree No 352 / 2005 Coll., on the details of the management and financing of electrical equipment and electrical waste (Ordinance on the management of electrical equipment and electrical waste)
In agreement with the Ministry of Finance, the Ministry of the Environment sets out in accordance with § 37f paragraph 2, § 37j paragraph 5 and § 37l paragraph 7 of Act No. 185 / 2001 Coll., on waste and on the amendment of certain other laws, as amended by Act No. 223 / 2009 Coll., Act No. 227 / 2009 Coll., Act No. 281 / 2009 Coll., Act No. 291 / 2009 Coll., Act No. 297 / 2009 Coll. and Act No. 326 / 2009 Coll.:
Decree No 352 / 2005 Coll., on the details of the management and financing of electrical equipment and electrical waste (Ordinance on the management of electrical equipment and electrical waste) is amended as follows:
1. Paragraph 7, including the title, reads:
List of uses of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenylethers (PBDE) not covered by Section 37j (3) of the Act
The list of uses of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenylethers (PBDE) not covered by Section 37j (3) of the Act is set out in Annex 5 to this Decree. '
2. In Annex 1, point 7.4, the words "water jumps' are replaced by the words" diving '.
3. Annex 5, including the title and footnotes 6 and 6a shall read as follows:
"Annex No 5 to Decree No 352 / 2005 Coll.
List of uses of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenylethers (PBDE) not covered by Section 37j (3) of the Act
1. Mercury in compact fluorescent lamps, which does not exceed 5 mg per lamp.
2. Mercury in tube fluorescent lamps for general purposes not exceeding its content
(a) for halophosphate lamps 10 mg,
(b) for triphosphate fluorescent lamps with a normal service life of 5 mg;
(c) in the case of triphosphate fluorescent lamps with an extended lifetime of 8 mg.
3. Mercury in tube fluorescent lamps for special purposes.
4. Mercury in other light sources not specifically specified in this Annex.
5. Lead in glass screens, electronic components and fluorescent lamps.
6. Lead as an additive
(a) in steel, containing up to 0,35% lead by weight,
(b) in aluminium alloys containing up to 0,4% lead by weight;
(c) in copper alloys containing up to 4% lead by weight.
7. Lead
(a) in solders with high melting points (e.g. alloys containing 85% or more by weight of lead),
(b) in solders for servers, memories and data storage systems and for network infrastructure equipment for switching, signalling, transmission and telecommunications network management;
(c) ceramic electronic components (e.g. piezoelectric apparatus).
8. Cadmium and its compounds in electrical contact and cadmium plating with the exception of the use of prohibited special legislation6).
9. Hexavalent chromium as an anti-corrosive agent in carbon steel cooling systems in absorption refrigerators.
10. DecaBDE in polymer applications.
11. Lead in lead / bronze bearing pans and cases.
12. Lead used in flexible pin connector systems.
13. Lead used as surface material for the c-ring type module for heat conduction.
14. Lead and cadmium in optical and filter glass.
15. Lead in solders containing more than two elements for the connection between pins and a set of microprocessors with a lead content of more than 80% and less than 85% by weight.
16. Lead in solders to build a stable electrical connection between semiconductor forming tool and carrier in integrated circuit sets using the "Flip Chip" technology.
17. Lead in linear bulbs with silicate coated tubes.
18. Lead halide as a source of radiation in high discharge discharge lamps (HID) used in professional reprographic applications.
19. Lead as an activator in fluorescent powder (not more than 1% by weight of lead) lamps when used as luminophores containing luminophores such as BSP (BaSi2O5: Pb) or as a special light source in diazographic reprography, lithography, insect traps, photochemical and preservation processes, and containing luminophores such as SMS (Sr, Ba) 2MgSi2O7: Pb).
20. Lead containing PbBiSn-Hg and PbInSn-Hg in certain mixtures as main amalgam and PbSn-Hg as secondary amalgam in compact, energy-efficient lamps.
21. Lead oxide in glass used for connecting front and rear materials in flat fluorescent lamps used in liquid crystal displays (LCD).
22. Lead and cadmium in printing colours for enamelling borosilicate glass.
23. Lead in low pitch components, other than connectors with a pitch of 0,65 mm or less, lead NiFe frames and lead in low pitch components, other than connectors with a pitch of 0,65 mm or less, with PbCu frames.
24. Lead in soldering solders for soldering holes in disc and flat multi-layer ceramic capacitors.
25. Lead oxide in plasma display panels (PDP) and electron emitter surface-conducting displays (SED) used mainly in the front and rear glass dielectric layer, bus electrode, black strip, address electrode, gate ribs, sealing frit, frit ring and solder paste for printing.
26. Lead oxide in glass flask UVB fluorescent lamps with black glass.
27. Lead alloys as solders for converters used in high-speed speakers (designed for several-hour operation at a sound power level of 125 dB SPL or higher).
28. Lead in crystal glass 6a).
29. Cadmium alloys such as electric / mechanical soldering of electrical conductors located directly on the oscillating coils of converters used in high-speed loudspeakers with a sound pressure level of 100 dB (A) or more.
30. Lead in soldering materials in mercury-free flat fluorescent lamps (which are used, for example, in liquid crystal displays, in design or industrial lighting).
31. Lead oxide in gasket frit used in the manufacture of window assembly units for argon and krypton laser tubes.
32. Lead in solders for soldering thin copper wires of diameter equal to or less than 100 µm in power transformers.
33. Lead in elements of tuning potentiometers made of metal-ceramic materials.
34. Mercury used as a cathode-ray tube inhibitor in DC plasma cathode-ray tubes containing up to 30 mg on the screen until 1 July 2010.
35. Lead in metal coated layer of high voltage diodes with glass case based on zinc borate.
36. Cadmium and cadmium oxide in thick layer pastes used for beryllium oxide associated with aluminium.
37. Lead, mercury, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenylethers (PBDE) in homogeneous materials * not more than 0,1% by weight of their concentration and cadmium in homogeneous materials * not more than 0,01% by weight of its concentration.
Note:
* Homogeneous material means material which cannot be mechanically divided into various material components and which has an immutable composition in all its parts such as plastics, ceramics, glass, metals, alloys, paper, plates, rubber, coating.
6) Annex XVII to Regulation (EC) No 1907 / 2006 of the European Parliament and of the Council of 18 December 2006 on the Registration, Evaluation, Authorisation and Restriction of Chemicals, establishing a European Chemicals Agency, amending Directive 1999 / 45 / EC and repealing Council Regulation (EEC) No 793 / 93, Commission Regulation (EC) No 1488 / 94, Council Directive 76 / 769 / EEC and Commission Directives 91 / 155 / EEC, 93 / 67 / EEC, 93 / 105 / EC and 2000 / 21 / EC.
6a) § 2 (1) (p) of Act No. 634 / 1992 Coll., on Consumer Protection as amended by Act No. 64 / 2000 Coll. Decree No. 379 / 2000 Coll. laying down the conditions for the identification of individual types of crystal glass, their characteristics and methods of labelling of crystal glass products. '
4. Point 2.3 of Annex 7, including footnotes 10, 10a and 11, reads as follows:
"2.3. Electrowaste containing controlled substances 10) (CFCs and HCFCs) or fluorinated greenhouse gases 10a) (HFCs) and electrical waste from installations where controlled substances or fluorinated greenhouse gases have been used or whose permanent function has been dependent on controlled substances or on fluorinated greenhouse gases shall be processed in accordance with the procedures for refrigeration equipment provided for in specific legislation (11).
10) Regulation (EC) No 1005 / 2009 of the European Parliament and of the Council of 16 September 2009 on substances that deplete the ozone layer.
10a) Regulation (EC) No 842 / 2006 of the European Parliament and of the Council of 17 May 2006 on certain fluorinated greenhouse gases.
11) Paragraph 31 (5) of Act No. 86 / 2002 Coll., on Air Protection as amended by Act No. 124 / 2008 Coll., Act No. 483 / 2008 Coll., Act No. 223 / 2009 Coll., Act No. 227 / 2009 Coll., Act No. 281 / 2009 Coll. and Act No. 292 / 2009 Coll. Decree No. 279 / 2009 Coll., on the prevention of emissions of controlled substances and fluorinated greenhouse gases. '
5. In Annex 7, point 2.4, the words "and parts and materials containing chlorofluorocarbons (CFCs), partially halogenated chlorofluorocarbons (HCFCs) and partly halogenated fluorinated hydrocarbons (HFCs) 'shall be added at the end of the text in point (i).
Efficacy
This Decree shall take effect on the 15th day following its publication.
Minister:
JUDr. Nitík, M.Sc., Rev.
Sign in for notes, favorites and notifications
Regulation Information
| Citation | Decree No. 65 / 2010 Coll., amending Decree No 352 / 2005 Coll., on the details of the management and financing of electrical equipment and electrical waste (Ordinance on the management of electrical equipment and electrical waste) |
|---|---|
| Regulation Type | - |
| Author | - |
| Collection | Code of Laws |
| Date of Promulgation | 16.03.2010 |
|---|---|
| Effective from | 31.03.2010 |
| Effective until | - |
| Status | Valid |
The regulation text is for informational purposes only.
Comments 0