Decree No. 72 / 2019 Coll.
Decree amending Decree No 343 / 2014 Coll., on Vehicle Registration, as amended
Valid
Effective from 01.04.2019
Text versions:
01.04.2019
14.03.2019
72
DECLARATION
of 7 March 2019
amending Decree No 343 / 2014 Coll., on Vehicle Registration, as amended
The Ministry of Transport provides pursuant to § 91 (1) of Act No. 56 / 2001 Coll., as amended by Act No. 307 / 1999 Coll., Act No. 103 / 2004 Coll., Act No. 411 / 2005 Coll., Act No. 226 / 2006 Coll., § 7d. 3, Act No. 170 / 2007 Coll., Act No. 297 / 2009 Coll., Act No. 152 / 2011 Coll., Act No. 239 / 2013 Coll., Act No. 24 / 2016 Coll., Act No. 298 / 2016 Coll., Act No. 63 / 2017 Coll., and Act No. 193 / 2018 Coll., (hereinafter "Act ') for the implementation of § 4 (7), § 7 (6), § 7b.
Regulation No 343 / 2014 Coll., on vehicle registration, as amended by Decree No 399 / 2015 Coll., Decree No 10 / 2017 Coll., Decree No 86 / 2017 Coll. and Order No 158 / 2017 Coll., is amended as follows:
1. In paragraphs 2 to 8, the text under the heading "§ 5 (8) 'is replaced by" § 5 (9)'.
2. In Paragraph 13, the text "Z 'is added at the end of paragraph 2.
3. in Article 15 (1) (a):
"(a) the type of technical inspection carried out;"
4. in Article 15 (2) (a) (1), the words "checking of the technical condition of the vehicle or combination" shall be replaced by the words "technical roadside inspection."
5. In Article 20 (1) (f), the word "Annexes' is replaced by" Annexes' and the words "and 9 ';
6. In Article 22 (1) and (2), "445 'is replaced by" 297'.
7. in Article 23, the following point (c) is inserted after point (b):
"(c) registration marks for electric vehicles;"
Points (c) and (d) shall be renumbered points (d) and (e).
8. in § 25, 27, 29, 31 and 32, the text under the heading "§ 7b (6)" shall be replaced by "§ 7b (8)."
9. In Section 25, the text is inserted after the words "7" except for the size of Table 520 x 110 mm, where 8 is done. "
10. After Paragraph 25, the following Section 25a is inserted:
Form, design and content of the registration mark of the electric vehicle and its table
(K § 7b (8) of the Act)
(1) The registration mark of an electric vehicle is composed of the capital letters "EL" and other Arabic numerals or capital letters of the Latin alphabet, which are 5 for cars, 4 for motorcycles, excluding the size of table 520 x 110 mm, where there are 5 for mopeds, and pedals, where there are 3.
(2) Tables bearing the registration mark of an electric vehicle with their dimensions, geometric arrangement of numbers and letters and colour design correspond to the tables with the standard registration mark for road motor vehicles and trailers. '
11. In Paragraph 26, the words "Latin alphabets' shall be added at the end of the text of paragraph 1.
12. In Paragraph 26, the words "or letters of the Latin alphabet 'shall be added at the end of paragraphs 3 and 4.
13. In Paragraph 27, the sentence "If a registration mark is arranged in two lines, the space for placing a sticker for a periodic technical inspection to the right at the end of the first line shall be added at the end of paragraph 2. ';
14. in Paragraph 29 (1) (a), the words "unless it has the space for placing the plate bearing the registration mark referred to in (b) or (e) shall be inserted after the words" the truck, "; for."
15. in Article 29 (1), the words "for other vehicles, unless they have room for placing the plate bearing the registration mark referred to in (d)," shall be added at the end of the text of point (a).
16. in Paragraph 29 (1) (d), the word "road" shall be deleted;
17. the words "and goods" shall be inserted after the words "personal."
18. in Article 29 (1) (h), the words "unless it has the space for placing the plate bearing the registration mark referred to in (i) or (l)" shall be inserted after the words "the truck,";
19. in Paragraph 32 (4), the third sentence is deleted;
20. in Article 32 (4) (b):
"(b) its upper edge is not more than 2000 mm above the road level if the design solution of the road vehicle does not allow it to meet a maximum distance of 1 200 mm above the road level."
21. In § 33, the text under the heading "§ 38 (6)" is replaced by "§ 38c (6)."
22. In Paragraph 33 (2), the words "or in accordance with the approval dossier 'shall be added at the end of the first sentence.
23. In Paragraph 33 (3), the words "for L-category vehicles' shall be inserted after the words" the mark '.
24. In Paragraph 33 (3), the words "road vehicle information package 'are replaced by the words" assessment of the test station or technical service, if any, by an additional modification'.
25. In Annex 4, point 5, the text "NG 'is replaced by the text" CNG'.
26. In Annex 5, in the part marked "COST AUTOMOBILE ', the words" PICK UP' are added to the second column after the text "BE '.
27. In Annex 5, in the part marked "COST AUTOMOBILE ', the words" OR RECLAMA' are added to the third column after the word "SALE '.
28. In Annex 5, in the part marked "COST AUTOMOBILE ', in the third column, the word" AIR' is replaced by "EXTRA '.
29. In Annex 5, the words "SPECIAL AUTOMOBILE (M1, M1G, N1, N2, N2G, N3G, O1, O2, O3, O4) 'are replaced by" (M, N, O)'.
30. In Annex 5, in the part marked "MOTOCYKL ', the text" (L1e, L2e, L3e, L4e, L5e, L6e, L7e, LM)' is replaced by "(L1e to L7e, including subcategories, LZ) '.
31. Annex No 8 shall read as follows:
"Annex No 8 to Decree No 343 / 2014 Coll.
Means of entering the data on the new vehicle technical licence
All entries in the Technical Card (hereinafter referred to as "TP ') shall be typed in substantially large letters of the alphabet, even if it uses a different type of font in the submitted documentation. Only for the heading of the harmonised type-approval of a road vehicle, variant, version and text in" OTHER RECORDS', the letters of the small alphabet may be used.
In case the number of characters is greater than the capacity of the item, only the reference to "OTHER RECORDS 'is entered under the item, where the whole item is given. In such a case, the character" * "shall be entered in the relevant item and the full entry shall be entered in the item" OTHER RECORDS "under the same item number. When the maximum number of characters is exceeded, the box shall show the characters that can be entered. The" * "shall be inserted after the last character.
The data to the TP shall be entered on the basis of legal documents, i.e. the document of approval of the technical competence of the vehicle and documentation certifying the recorded data in the TP.
If the indication for the category is not relevant or does not appear in the Technical Authorisation Document, it shall not be provided.
Items entered on the vehicle's technical licence, classified as indicated on the vehicle's technical licence:
K Type-approval number of the vehicle: the harmonised or national type-approval number of the road vehicle shall be entered. If both options exist, they shall be written down and divided by a slash in order of harmonised approval.
Type of vehicle: the entry from the first column of the table set out in Annex 5 is entered.
2 The entry from the second column of the table set out in Annex 5 shall be entered.
J Vehicle category: abbreviation of vehicle category - an indication established on the basis of harmonised and national rules based on technical characteristics of the vehicle.
D.1 Factory mark: an indication specified at the time of approval of the vehicle's technical competence.
D.2. Type: an indication established at the time of approval of the technical suitability of the vehicle.
3 / 4 Variant / version: an indication set at the time of approval of the vehicle's technical competence. If not specified by the manufacturer, it shall not be entered in TP.
E Vehicle identification number (VIN): The vehicle identification number shall be entered without spaces and separators.
D.3. Trade description: an indication established at the time of approval of the vehicle's technical competence. If not specified by the manufacturer, it shall not be entered in TP.
5 Vehicle manufacturer: indication in the format of the manufacturer's name, city, state. If the maximum number of characters is exceeded, it is possible to shorten the name of the manufacturer or not to indicate the city.
6 Engine manufacturer: an indication in the format of the manufacturer's name, city, unless otherwise specified in the approval of technical competence. If the maximum number of characters is exceeded, it is possible to shorten the name of the manufacturer or not to indicate the city.
7 Type: an indication established at the time of approval of the technical competence of the vehicle.
P.2 / P.4 Maximum power [kW] at speed [min-1]: structure figure: power rounded to a maximum of one decimal place / speed or maximum continuous rated power for an electric motor. In the case of previously approved vehicles which have power shown in horses, the figure shall not be recalculated and the symbol "k 'shall be entered for the power value. The power unit declared by the vehicle manufacturer shall always be reported.
P.3 Fuel: the entry from the table set out in Annex 4 is entered.
P.1 Lift, volume [cm3]: structure: volume rounded to no more than one decimal place
V.9 Emission limit No: entry of data on the basis of a regulation that clearly meets the / emission level of EURO. The EURO emission level shall be reported in the form of "EURO 'in conjunction with Arab numerals.
V.6 Correction coefficient of absorption [m-1]: structure figure: smoke value rounded to no more than two decimal places.
V.7 / V.8 CO2 / Fuel consumption [g * km-1 / L * 100 km-1]: structure figure: CO2 combined / consumption combined, rounded to a maximum of one decimal place. The data is recorded for vehicles of those categories for which this information is required by the international regulatory base, which is bound by the Czech Republic.
8 Manufacturer: Body manufacturer in manufacturer's format, city, state. If the maximum number of characters is exceeded it is possible to shorten the name of the manufacturer or not to indicate the city If the bodywork manufacturer is the same as the vehicle manufacturer, it shall not be entered in TP.
Type (s): the entry from the third column of the table set out in Annex 5 by type of vehicle.
10 Production number (next step): the entry shall be entered only if it is different from the vehicle identification number (VIN); in this TP item, the superstructure manufacturer (in gradual production) writes his serial number.
R Color: entry from Annex 6 is written.
S / S.1 / S.2 Total number of seats / seating / standing position: an indication set at the time of approval of the vehicle's technical competence.
11,12,13 Total [mm]: length, width, height: an indication specified when the vehicle is approved for its technical competence.
M Wheelbase [mm]: an indication established at the time of approval of the vehicle's technical competence. The partitions shall be separated by the symbol "+ '.
14 Dispatch [mm]: an indication established at the time of approval of the vehicle's technical competence. In case of a range, a larger figure is written. To be reported for M1 and N1 category vehicles.
G Operating mass [kg]: an indication established at the time of approval of the vehicle's technical competence.
F.1 / F.2 The maximum technically permissible mass (s) [kg]: The value determined when the vehicle is approved shall be recorded. The mass technically permissible and authorised shall always be entered with the separate symbol "/ '. If technically permissible and permissible masses are identical in value, both values shall always be recorded. The technically permissible value is determined by the manufacturer and the authorised mass is the mass established by the legislation governing the authorised mass of vehicles. Where authorised masses are not included in the submitted documentation under the law, these values should be established for the category and implementation of the vehicle under the legislation governing the authorised vehicle masses.
N Maximum technically permissible axle load / permissible axle mass [kg]: The value determined when the vehicle is approved for its technical competence shall be recorded. The mass technically permissible and authorised shall always be entered with the separate symbol "/ '. If technically permissible and permissible masses are identical in value, both values shall always be recorded. The technically permissible value is determined by the manufacturer and the authorised mass is the mass established by the legislation governing the authorised mass of vehicles. Where authorised masses are not included in the submitted documentation under the law, these values should be established for the category and implementation of the vehicle under the legislation governing the authorised vehicle masses.
O1, O.2 The maximum technically permissible mass (s) of the trailer [kg] (Braked or unbraked): The value specified at the time of approval of the vehicle's technical competence shall be recorded. The mass technically permissible and authorised shall always be entered with the separate symbol "/ '. If technically permissible and permissible masses are identical in value, both values shall always be recorded. If the vehicle is not intended for towing, the items shall remain empty.
15 The maximum technically permissible / permissible mass of the combination [kg]: an indication specified when the vehicle is approved for its technical competence. The data shall be recorded only for vehicles capable of towing the trailer.
16 Connector - type: entry from Annex 7 is entered.
L Number of axles - of which driven: the figure in the structure is recorded: the total number of axles - the number of axles driven and verbally, which are (according to order from the front of the vehicle).
N Wheels and tyres on axle (1-2- 3-4....) - dimensions / installation (dual = 2): the structure information is recorded: the wheel dimension including the bay; Tyre size including mass and speed index (e.g. 7.0JX18 ET51; 225 / 55 R18 98V). If it is a double assembly, "(2)" is written for writing. Where the information is given in a harmonised approval, it shall be recorded to the extent that it is entered in the certificate of conformity. Variable uses are listed in "Other records."
U.1 / U.2 External noise of the vehicle (dB (A)) - standing at [rpm * 1]: the figure in the structure is recorded: the noise rounded to no more than one decimal place / speed.
U.3 while driving: The figure in the structure is recorded: noise rounded to no more than one decimal place.
T Maximum permitted speed (km / h): The value determined at the time of approval of the vehicle's technical competence shall be recorded. The equipment of the vehicle shall not be indicated by the restraint.
Q: Power / mass ratio (kW * kg-1): the figure is rounded to three decimal places. This is the ratio of power to operating weight. To be reported only for L-category vehicles.
17 Regulation, fuel consumption (L / 100 km): The data shall be entered for those categories of vehicles which have it in the information package. Data shall be provided according to the NEDC methodology. Indication in the structure: Regulation according to which consumption is declared, urban / intermediate / combined consumption value rounded to no more than one decimal place. Where an indication is given according to other methodologies, it shall be reported according to the methodology in force at the time of approval.
RECORDING TO APPROVAL OF THE TECHNICAL ELIGIBILITY OF THE VEHICLE
The box is intended for the completion of the data on the approval of the technical capacity of a road vehicle and is always entered at the time of issue of the technical licence under the heading "date 'and" stamp and signature of the authorised person', the recognition and approval of the technical capacity of the vehicle, including the "approval number '.
OTHER RECORDS
The following information shall be entered in the box:
1. on the document of technical competence of a road vehicle accompanying the application for registration of a vehicle in the register of road vehicles to the extent that the document is identified and the particulars of the registration mark issued in another Member State, including the indication of the country of origin of the vehicle.
2. the variable design of the road vehicle with the indication "#" and the alternative design with the indication "*" and the item to which the entry is linked.
3. the legal exceptions allowed when approving the technical competence of a road vehicle.
4. on the approval of the technical competence of a road vehicle at stage 2 of approval.
5. Whether it is a duplicate. In the case of duplicate, the data entered in the vehicle technical licence shall be used to the extent applicable at the time of approval of the technical competence of the vehicle, even if such data contravenes the legislation in force at the time of issue of the duplicate, except for obvious errors.
6. on the individual use / installation of vehicle equipment requiring a technical assessment.
7. the historical nature of the vehicle.
8. specifying the performance of the vehicle.
9. on fuel consumption and CO2 value in case of multi-fuel vehicle approval. Data for second and other fuels shall be recorded. ';
32. Annex 9 is deleted.
33. Annex 10 reads as follows:
"Annex No 10 to Decree No 343 / 2014 Coll.
Model of road vehicle technical licence
Corner side
"
34. Annex 11 shall read:
"Annex No 11 to Decree No 343 / 2014 Coll.
Model of special vehicle technical licence
Corner side
"
35. Annex 17 shall read as follows:
"Annex No 17 to Decree No 343 / 2014 Coll.
Application for issue of a registration plate table
Other
"
Transitional provisions
1. The valid technical licences of road vehicles and the valid technical licences of special vehicles issued before the date of entry into force of this Decree shall remain valid.
2. Forms of the road vehicle technical pass and special vehicle technical pass pursuant to Decree No 343 / 2014 Coll., as effective before the date of entry into force of this decree, may be issued and used for registration until their stocks are exhausted, but no later than 31 December 2020. Where a road vehicle not registered in the road vehicle register has been issued by the seller before 31 December 2020, the registration of the road vehicle in the road vehicle register shall continue after that date.
3. The registration plate form produced before the date of entry into force of this Decree may be used until stocks are exhausted, but no later than 31 December 2020.
Efficacy
This Decision shall enter into force on 1 April 2019.
Minister:
Ing.
Sign in for notes, favorites and notifications
Regulation Information
| Citation | Decree No. 72 / 2019 Coll., amending Decree No. 343 / 2014 Coll., on Vehicle Registration, as amended |
|---|---|
| Regulation Type | - |
| Author | - |
| Collection | Code of Laws |
| Date of Promulgation | 14.03.2019 |
|---|---|
| Effective from | 01.04.2019 |
| Effective until | - |
| Status | Valid |
The regulation text is for informational purposes only.
Comments 0