Decree No. 337 / 2011 Coll.
Decree on energy labelling and ecodesign of energy-related products
Valid
Order
Effective from 21.11.2011
Zobrazeno prvních 200 z celkem 569 ustanovení tohoto předpisu.
Zobrazit celý předpis →
Pro stažení celého znění použijte tlačítko Stáhnout výše.
337
DECLARATION
of 11 November 2011
on energy labelling and ecodesign of energy-related products
According to Article 14 (5) of Act No. 406 / 2000 Coll., on Energy Management, as amended by Act No. 177 / 2006 Coll., ("the Act '), the Ministry of Industry and Trade provides for the implementation of Sections 8 (1), 8 (2) (a) and (g), 8 (3) (b) and (d), 8 (4) (b) and (c), 8 (7), 8 (a) (1), 8 (a) (2) (a), 8 (3) (d) and (e) and 8 (6) of the Act:
Subject matter
This decree, in accordance with European Union1) provides
(a) particulars of the labelling of energy-related products and their placement, design and content of energy labels, information sheets and technical documentation, methods and procedures for measuring, identification of energy efficiency class and list of energy-related products;
(b) ecodesign requirements, the particulars of the CE marking, the content of the EC declaration of conformity, the conformity assessment procedures and the presumption of conformity of energy-related products, the procedures for verifying ecodesign requirements and the provision of information on and use of the energy-related product and the list of energy-related products.
List of energy related products for energy labelling
(1) The energy-related products covered by the directly applicable European Union rules listed in Annex 1 to this Decree on energy labelling are:
(a) washing machines;
(b) television receivers;
(c) refrigerators, freezers and combinations thereof;
(d) dishwashers,
(e) air conditioners.
(2) Other energy-related products not covered by directly applicable European Union energy labelling regulations are:
(a) tumble driers,
(b) electric ovens,
(c) washing machines combined with a dryer;
(d) light sources;
(e) ballasts for fluorescent lamps.
Energy labelling and placement, information sheet and technical documentation
The design of the label and its content and location, the content of the technical documentation and the information sheet, the determination of the energy efficiency class, the methods and procedures for measuring and making information available to the end-user for each of the energy-related product types set out in Section 2 (1), is set out in the directly applicable European Union provisions listed in Annex 1 to this Regulation and for each of the energy-related product types set out in Section 2 (2), are set out in Annexes 2 to 6 to this Regulation.
List of energy-related products for ecodesign
The energy-related products covered by the directly applicable European Union rules listed in Annex 7 to this Order on ecodesign requirements shall be:
(a) electrical and electronic equipment intended for households and offices in standby and off mode;
(b) set- top-boxes,
(c) refrigerating appliances;
(d) television receivers;
(e) gas-free circulatory pumps,
(f) electric motors;
(g) external sources of electricity;
(h) non-directional lamps;
(i) fluorescent lamps without integrated ballast, high-intensity discharge lamps and ballast lamps and lamps,
(j) household washing machines;
(k) household dishwashers,
(l) fans powered by electric motors with power in the range of 125 W to 500 kW.
Ecodesign requirements, CE marking and EC declaration of conformity
(1) The ecodesign requirements for energy-related products, including the timetable for their application, are laid down in directly applicable European Union provisions.
(2) Where an EC declaration of conformity is attached to an energy-related product with the CE marking and the EC declaration of conformity is issued to that product, the energy-related product complies with all the ecodesign requirements given for the energy-related product in the directly applicable European Union Regulation.
(3) The CE marking shall be an indication of the conformity of energy-related products with ecodesign requirements and shall consist of the letters "CE 'in accordance with the model set out in Annex 8 to this Regulation.
(4) The EC declaration of conformity shall contain the following elements:
(a) identification details of the manufacturer comprising at least the name or address of the manufacturer;
(b) identification details of the authorised representative, provided that they have been established, comprising at least the name and address of the authorised representative;
(c) identification of the person authorised to act on behalf of the manufacturer or his authorised representative and his signature;
(d) a detailed description of the product type enabling it to be clearly identified;
(e) references to harmonised standards, other standards or technical specificsused (2);
(f) a reference to other European Union legislation which provides for the affixing of the CE marking.
Conformity assessment and presumption of conformity
(1) The conformity assessment of an energy-related product with the ecodesign requirements laid down in the directly applicable European Union Regulation shall be carried out by internal design inspection or conformity assessment management system set out in Annex 9 to this Regulation.
(2) The energy-related product which has been produced according to harmonised standards is in conformity with the requirements of the directly applicable European Union Regulation to which those standards apply.
Procedures for verifying ecodesign requirements and providing information
(1) The procedures for verifying ecodesign requirements for an energy-related product for market surveillance purposes are set out in a directly applicable European Union Regulation.
(2) The procedures for providing information on the energy-related product and its use are set out in a directly applicable European Union regulation.
Repeal
Decree No 442 / 2004 Coll., laying down the details of the labelling of energy-labelling appliances and the processing of technical documentation, as well as the minimum energy efficiency for electrical appliances placed on the market, shall be deleted.
Efficacy
This Decree shall take effect on the day of its publication, except as provided for in
(a) Article 2 (1) (a) and (d), which shall take effect on 20 December 2011; and
(b) Paragraph 2 (1) (e), which shall take effect on 1 January 2013.
Minister:
Ing. Kocourek v. r.
Příloha č. 1
Annex No 1 to Decree No 337 / 2011 Coll.
List of directly applicable European Union provisions on energy-related products on energy labelling
| Výrobky spojené se spotřebou energie | Uvedení v předpisu |
|---|---|
| Pračky | Nařízení Komise v přenesené pravomoci (EU) č. 1061/2010 ze dne 28. září 2010, kterým se doplňuje směrnice Evropského parlamentu a Rady 2010/30/EU, pokud jde o uvádění spotřeby energie na energetických štítcích praček pro domácnost. |
| Televizní přijímače | Nařízení Komise v přenesené pravomoci (EU) č. 1062/2010 ze dne 28. září 2010, kterým se doplňuje směrnice Evropského parlamentu a Rady 2010/30/EU, pokud jde o uvádění spotřeby energie na energetických štítcích televizních přijímačů. |
| Chladničky, mrazničky a jejich kombinace | Nařízení Komise v přenesené pravomoci (EU) č. 1060/2010 ze dne 28. září 2010, kterým se doplňuje směrnice Evropského parlamentu a Rady 2010/30/EU, pokud jde o uvádění spotřeby energie na energetických štítcích chladících spotřebičů pro domácnost. |
| Myčky nádobí | Nařízení Komise v přenesené pravomoci (EU) č. 1059/2010 ze dne 28. září 2010, kterým se doplňuje směrnice Evropského parlamentu a Rady 2010/30/EU, pokud jde o uvádění spotřeby energie na energetických štítcích myčky pro domácnost. |
| Klimatizátory vzduchu | Nařízení Komise v přenesené pravomoci (EU) č. 626/2011 ze dne 4. května 2011, kterým se doplňuje směrnice Evropského parlamentu a Rady 2010/30/EU, pokud jde o uvádění spotřeby energie na energetických štítcích klimatizátorů vzduchu. |
Příloha č. 2
Annex No 2 to Decree No 337 / 2011 Coll.
Dryers
Preliminary provisions
1. The requirements contained in this Annex shall apply to household tumble driers powered from an electrical network. They do not apply to appliances which may also use other energy sources and do not apply to washing machines combined with a dryer.
2. The data required by this Annex shall be collected by measurements carried out according to harmonised technical standards. The data shall be considered to be satisfied if they are in conformity with legislation or technical standards.
The provisions of this Annex which require the provision of noise-related data shall apply only if such data are required by law. These data are then collected by measurement.
3. the technical documentation shall include:
(a) the name and surname or business name or name, address of the place of permanent residence (where applicable, address of residence) or place of business or registered office of the manufacturer or importer;
(b) a description of the appliance sufficient for its unambiguous identification;
(c) the data and, where appropriate, the relevant drawings concerning the main features of the design of the appliance model and, in particular, the components which have an appreciable effect on its energy consumption;
(d) reports of relevant tests carried out by test methods according to harmonised standards;
(e) operating instructions.
4. The label shall comply with the requirements set out in Part I of this Annex. The label shall be placed on the outside of the front or top of the appliance so that it is clearly visible and not covered.
5. The content and presentation of the information sheet shall comply with the requirements set out in Part II of this Annex.
6. Where an appliance is offered for sale, hire or hire-purchase by means of printed matter or other means, e.g. in the mail order catalogue, the relevant information shall contain all the information specified in Part III of this Annex.
7. The energy efficiency class of the appliance indicated on the label and in the information sheet shall correspond to Part IV of this Annex.
Other content of Annex No 2:
Part I LABEL
Part II INFORMATION SHEET
Part III CONSIDERATION SALES AND OTHER SPECIES OF EXTENDED SALES
Part IV ENERGY EFFICIENCY CLASS
LABEL
Specification of the label
The following particulars shall appear on the label:
I. Name or trade mark of the manufacturer or importer.
II. Identification mark of the appliance model used by the manufacturer or importer.
III. The energy efficiency class of the appliance model determined in accordance with Part IV of this Annex. The arrow tip with the letter indicating the energy efficiency class shall be at the same level as the arrow tip.
IV. Without prejudice to any requirements of the relevant national, regional or international environmental labelling programme of model I. (ecolabelling programme), a copy of the eco-label may be attached if the appliance has been awarded an eco-label in accordance with the relevant eco-label programme. The eco-label may be indicated on the label, and its design (colour, dimensional, etc.) must comply with the rules of the relevant ecolabelling programme.
V. Energy consumption in kWh per cycle using the dry cotton cycle in accordance with test methods according to harmonised standards according to paragraph 2 of the initial provisions of this Annex.
VI. The filling of the dryer (cotton) in kg in accordance with the harmonised standards referred to in point 2 of this Annex.
VII. Type of appliance, with exhaust air or condensation, in accordance with test methods according to the harmonised standards referred to in point 2 of the initial provisions. The arrow must be placed at the same level as the species concerned.
VIII. Noise during the drying cycle, if applicable, in accordance with the legislation or harmonised standards referred to in point 2 of the Introductory Regulation.2)
Graphic design
Definition of the graphic design of the label
Colors used:
CMYK - cyan, magenta, yellow, black
Example 07X0: 0% cyan, 70% magenta, 100% yellow, 0% black
Darts:
A X0X 0
B 70X 0
C 30X 0
D 00X0
E 03X 0
F 07X 0
G 0XX 0
Frame color: X070
The background color of the arrow indicating the energy efficiency class is black.
All the lyrics are black. The background is white.
INFORMATION LIST
The information sheet shall contain the following information. This information may be given in a specified order in the form of a table for several models of an appliance supplied by the same manufacturer or importer, or attached to the description of the tumble drier:
1. The name or trade mark of the manufacturer or importer.
2. Identification mark of the appliance model used by the manufacturer or importer.
3. The energy efficiency class of the appliance model as defined in Part IV of this Annex, expressed as "Energy efficiency class... on scale A (highest efficiency, i.e. low electricity consumption) to G (lowest efficiency, i.e. high electricity consumption) '. Where this information is given in the form of a table, this information may also be expressed in another way, provided that it is clear that the scale is from A (highest efficiency) to G (lowest efficiency).
4. Where the information is given in the form of a table and one of the appliances listed in the table has been awarded an eco-label according to the relevant national, regional or international environmental labelling programme of model I. (eco-label programme), this information may be provided. In this case, the heading of the line shall be "Eco-label 'and a copy of the eco-label shall be in the appropriate field in a colour and size version corresponding to the rules of the relevant eco-label programme.
5. Energy consumption in kWh per cycle using the "dry cotton" cycle in accordance with test methods according to harmonised standards according to point 2 of the initial provisions of this Annex (Part I. of this Annex, point V).
6. Nominal quantity of dry-cleaner (cotton) filling in kg in accordance with the harmonised standards referred to in point 2 of the initial provisions of this Annex (Part I. of this Annex, point VI).
7. Water consumption in accordance with test methods according to harmonised standards according to point 2 of the initial provisions of this Annex for the "dry cotton 'programme cycle, if applicable.
8. Drying time in accordance with test methods according to harmonised standards according to point 2 of the initial provisions of this Annex for the "dry cotton 'cycle.
9. The same data as in points 5, 6 and 7 above, but with regard to the "pressed dry cotton 'and" easy to treat' programmes. These lines may be deleted if the appliances in question do not have such programmes.
10. Manufacturers or importers may add to the above points 5 to 8 information concerning other drying cycles.
11. Average annual energy consumption (or water) based on drying of textiles with a programme of 150 kg "dry cotton," plus 280 kg "iron dry cotton," plus 150 kg "easy to handle." Consumption shall be expressed as "Estimated annual consumption of a four-member household normally using a dryer '.
12. Type of appliance, with air outlet or condensation, in accordance with test methods according to harmonised standards according to paragraph 2 of the initial provisions of this Annex (Part I of this Annex, paragraph VII).
13. Noise data, if any, in accordance with legislation or harmonised technical standards.
If the label is reproduced in colour or black and white in the information sheet, only data not on the label should be added.
ALTERNATIVE SALES AND OTHER SPECIES OF EXTENDED SALES
The catalogues for mail order sales and other printed matter or in any other way of sale referred to in point 6 of the introductory provisions of this Annex shall contain the following information in the following order:
1. Energy efficiency class (Part II, point 3)
2. Energy consumption (Part I. V)
3. Quantity of filler (Part I. point VI)
4. Water consumption per cycle if required (Part II, point 7)
5. Estimated annual household consumption (Part II, point 11)
6. Noise (Part I. point VIII)
Where other information contained in the information sheet is provided, it shall be provided in the manner set out in Part II of this Annex and shall be included in the above table in the order specified for the information sheet.
ENERGY EFFICIENCY CLASS
The energy efficiency class of tumble driers shall be determined in accordance with the following tables:
Table 1-Air drying machines
| Třída energetické účinnosti | Spotřeba energie „C“ v kWh/kg náplně, při použití zkušební metody dle harmonizovaných norem podle bodu 2 úvodního ustanovení této přílohy při cyklu „suchá bavlna“ |
|---|---|
| A | C ≤ 0,51 |
| B | 0,51 < C ≤ 0,59 |
| C | 0,59 < C ≤ 0,67 |
| D | 0,67 < C ≤ 0,75 |
| E | 0,75 < C ≤ 0,83 |
| F | 0,83 < C ≤ 0,91 |
| G | C > 0,91 |
Table 2 - Condensation dryers
| Třída energetické účinnosti | Spotřeba energie „C“ v kWh/kg náplně, při použití zkušební metody dle harmonizovaných norem podle bodu 2 této přílohy při cyklu „suchá bavlna“ |
|---|---|
| A | C ≤ 0,55 |
| B | 0,55 < C ≤ 0,64 |
| C | 0,64 < C ≤ 0,73 |
| D | 0,73 < C ≤ 0,82 |
| E | 0,82 < C ≤ 0,91 |
| F | 0,91 < C ≤ 1,00 |
| G | C > 1,00 |
Příloha č. 3
Annex No 3 to Decree No 337 / 2011 Coll.
Combined machines with a drier
Preliminary provisions
1. The requirements contained in this Annex shall apply to washing machines combined with a household dryer powered from an electric network. They shall not apply to appliances which may also use other energy sources.
2. The data required by this Annex shall be collected by measurements carried out according to harmonised technical standards. The data shall be considered to be satisfied if they are in conformity with legislation or technical standards. The provisions of this Annex which require the provision of noise-related data shall apply only if such data are required by law. These data are then collected by measurement.
3. The technical documentation referred to in Section 3 of the Decree shall include:
(a) the name and surname or business name or name, address of the place of permanent residence (where applicable, address of residence) or place of business or registered office of the manufacturer or importer;
(b) a description of the appliance sufficient for its unambiguous identification;
(c) the data and, where appropriate, the relevant drawings concerning the main features of the design of the appliance model and, in particular, the components which have an appreciable effect on its energy consumption;
(d) reports of relevant tests carried out by test methods according to harmonised standards;
(e) operating instructions.
4. The label referred to in Section 4 of the Decree shall comply with the requirements set out in Part I of this Annex. The label shall be placed on the outside of the front or top of the appliance so that it is clearly visible and not covered.
5. The content and presentation of the information sheet referred to in Section 3 of the Decree shall comply with the requirements set out in Part II of this Annex.
6. Where an appliance is offered for sale, hire or hire-purchase by means of printed matter or other means, e.g. in the mail order catalogue, the relevant information shall contain all the information specified in Part III of this Annex.
7. The energy efficiency class for the complete working cycle and the washing efficiency class indicated on the label and in the information sheet shall correspond to Part IV of this Annex.
Other content of Annex 3:
Part I LABEL
Part II INFORMATION SHEET
Part III CONSIDERATION SALES AND OTHER SPECIES OF EXTENDED SALES
Part IV ENERGY EFFICIENCY CLASS
LABEL
Specification of the label
The following particulars shall appear on the label:
I. Name or trade mark of the manufacturer or importer.
II. Identification mark of the appliance model used by the manufacturer or importer.
III. The energy efficiency class of an appliance shall be determined in accordance with Part IV of this Annex. The arrow tip with the letter indicating the energy efficiency class must be at the same level as the arrow tip
IV. Without prejudice to any requirements of the relevant national, regional or international environmental labelling programme of model I. (ecolabelling programme), a copy of the eco-label may be attached if the appliance has been awarded an eco-label in accordance with the relevant eco-label programme. Its design (colour, dimensional, etc.) shall comply with the rules of the relevant ecolabelling programme.
V. Energy consumption in kWh for the complete working cycle (washing, centrifugation and drying) using the standard cycle 60 st. C (cotton) and the dry cotton drying cycle determined in accordance with the test methods according to the harmonised standards referred to in point 2 of the introductory provisions of this Annex.
VI. Energy consumption in kWh per cycle of work (washing and centrifugation only) using a standardised cycle of 60 st C (cotton) determined in accordance with test methods according to harmonised standards according to point 2 of the initial provisions of this Annex.
Sign in for notes, favorites and notifications
Regulation Information
| Citation | Decree No. 337 / 2011 Coll., on energy labelling and ecodesign of energy-related products |
|---|---|
| Regulation Type | Order |
| Author | - |
| Collection | Code of Laws |
| Date of Promulgation | 21.11.2011 |
|---|---|
| Effective from | 21.11.2011 |
| Effective until | - |
| Status | Valid |
The regulation text is for informational purposes only.
Comments 0