Order of the Czech Mining Office No. 238 / 1998 Coll.
Decree of the Czech Mining Office amending the Order of the Czech Mining Office No. 55 / 1996 Coll., on the requirements for ensuring safety and health at work and safety of operation in the mining activity in the underground
Valid
Order
Effective from 01.04.1999
Text versions:
01.04.1999
19.10.1998
238
DECLARATION
Czech Mining Office
of 30 September 1998
amending the Order of the Czech Mining Authority No. 55 / 1996 Coll., on requirements to ensure safety and health at work and safety of operation in the mining activity in the underground
According to § 6 (6) (a) of Act No. 61 / 1988 Coll., on Mining Activities, Explosives and State Mining Administration, the Czech Mining Authority provides:
Decree No. 55 / 1996 Coll., on the requirements to ensure safety and health at work and the safety of operations in a mining activity in underground is amended as follows:
1. In Article 5, the following sentence shall be added at the end of paragraph 1, including footnote 4a: "Only products which comply with the requirements for a safe product may be included in the use. (4a)
4a) § 2 (a) of Act No. 22 / 1997 Coll., on technical requirements for products and amending and supplementing certain laws. '.
2. The following Section 5a is inserted after Section 5:
Object requirements
(1) Floors shall have no dangerous obstacles, holes or inclination and shall be firm, stable and non-slippery.
(2) The surface area (base), height and volume of the work space must be designed and carried out so that workers can carry out their work without affecting their safety, health or good working well-being. 17)
(3) The space available to the staff member at the workplace must be such that the staff member has sufficient freedom of movement in his activity and can carry out his tasks safely. 17)
(4) Windows, skylights and ventilation equipment which can be opened, closed, rebuilt and secured should be designed and constructed in such a way as to guarantee safe handling. In the open state it shall not constitute a danger to workers. Safe cleaning of windows and skylights shall be possible.
(5) Transparent or translucent walls, bulkheads in or near the transport routes, doors and doors shall be clearly marked at eye level and shall be made from safety materials or reliably protected in order to prevent injury to workers if they are broken.
(6) Access to roofs from materials which do not have adequate load resistance shall be prohibited unless there is a device in place that allows the appropriate operation to be performed safely.
(7) The location, number and dimensions of doors and doors and the materials for their manufacture must be chosen according to the characteristics and manner of use of premises and workplaces.
(8) Doors and doors must meet the following requirements:
(a) the shuttle doors and doors shall be transparent; if they are not transparent, they must have a transparent window,
b) the sliding door shall be secured against ejection and falling out;
(c) doors and doors opening upwards shall be capable of being secured against unexpected falling back;
(d) the emergency doors shall be opened outwards, marked, their structures shall be capable of being opened at any time even from the inside without any means of assistance and shall not be locked;
(e) a door on the road with traffic, if the passage by it for pedestrians is not safe, it shall be equipped with other well-visible and still accessible doors for passage;
(f) a door and door operated by mechanical force shall not endanger workers by moving it, shall be equipped with a clear, well-recognizable and easily accessible emergency switch-off device and, except where they are automatically opened in the event of power failure, shall also allow manual opening;
(g) where access to a site is restricted by chains or similar devices, such chains or similar devices shall be clearly visible and marked with appropriate signs of prohibition or warning.
(9) Auxiliary operating objects, such as workshop, office, warehouse or break room, must be located in an area without any risk of explosion.
(10) If the measuring and control devices to which the gas is supplied are installed in the operating facility, their exhaust pipe shall be removed from the facility so that the gas cannot return, even diluted.
(11) Operating objects must be marked with the object name. ';
3. In Article 16 (1) (d), the words "instructions (instructions) for use, operation, maintenance, installation and dismantling 'are replaced by the words" instructions for use';
13a) Point 1.7.4 of Annex 1 to Decree No. 170 / 1997 Coll., laying down technical requirements for machinery. '
4. In Article 26 (3), the last sentence is deleted.
5. In Paragraph 100 (1), the words "protective circuit 'are replaced by the words" protective wire'.
6. In Article 123, the following paragraph 6 is added after paragraph 5, including footnote 21:
"(6) The crossing of the narrow-track on the road surface with road traffic shall be marked by means of road signs. 21)
21) Decree No. 99 / 1989 Coll., on road traffic rules (road traffic rules), as amended. Section 6 and 7 of Act No. 13 / 1997 Coll., on Road. § 10 (2) of Act No. 12 / 1997 Coll., on the safety and continuity of road traffic. '
7. In Article 137, the following paragraph 7 is inserted after paragraph 6:
"(7) The hand marker shall be given by a lamp with white or yellow light. The meaning of the hand-held label is given in Annex 1. ';
8. The following Section 137a is inserted after Section 137:
Transport signs and signs
(1) In order to secure the road with a locomotive, a sign or a sign must be established at the places designated by this decree.
(2) The shape, description and colour of the transport labels shall be as specified in Annex 2, the dimensions and presentation of each label including the shape and location of the symbols as specified in Annex 3.
(3) The contact signs (e.g. suspended chains or belts) shall be set up where the environment and conditions make it impossible for the label to be visible or distinguishable or at the point of entry into narrow sections of the road. The contact sign shall be set up in at least two pairs, 2 to 3 m apart, of a width equal to the width of the locomotive, passenger wagon, etc.
(4) The "Warning" sign is placed
(a) at the points of entry of the train into the terminal station, impactor and other handling areas;
(b) before the train passes through the wagon line, the transhipment station and the filling device;
(c) in the places where the road is operated, taking into account the length of the stopping distance of the train set.
(5) The "Reduced cross-section" or "Narrow cross-section" shall be located where the cross-section of the road is not maintained, in particular in front of, or directly on, the dam or wind doors and at the points of the filling device.
(6) The signs indicating the intersection of lines, switches, turns, boarding and exit stations shall be located in front of the traffic points specified by the timetable. The employer shall determine which switches and turns must be marked with regard to safety and continuity of operation.
(7) The sign "Give warning signals" must be placed where work on the road is carried out at a distance specified by the timetable.
(8) The "No entry" sign closes the road or its section for any mode of transport. In conjunction with the relevant table with the text, it may also limit traffic on this road only for a specified (defined) mode of transport.
(9) The Marker shall be placed on the railway wagon lines, in the transhipment stations and on the tracks intended for unloading wagons.
(10) The sign "Repeal of the previous label" defines the end of the orders, warnings and prohibitions given by the signals No 1 and 5 in accordance with Annex No 2.
(11) The overhead contact line shall be placed on the traction line device. ';
9. The following Annex 1 is added:
Příloha č. 1
Annex No 1 to Decree No. 55 / 1996 Coll.
Hand-held signals
10. The following Annex 2 is added:
Příloha č. 2
Annex No 2 to Decree No 55 / 1996 Coll.
Transport signs
11. the following Annex 3 is added:
Příloha č. 3
Annex No. 3 to Decree No. 55 / 1996 Coll.
Dimensions and modifications of the label
This Decree shall take effect on 1 April 1999.
Chairman:
Doc. JUDr. Ing. Makarius, CSc.
Sign in for notes, favorites and notifications
Regulation Information
| Citation | Decree of the Czech Mining Authority No. 238 / 1998 Coll., amending the Order of the Czech Mining Authority No. 55 / 1996 Coll., on requirements to ensure safety and health at work and safety of operation in mining activities in underground |
|---|---|
| Regulation Type | Order |
| Author | - |
| Collection | Code of Laws |
| Date of Promulgation | 19.10.1998 |
|---|---|
| Effective from | 01.04.1999 |
| Effective until | - |
| Status | Valid |
The regulation text is for informational purposes only.
Comments 0