Decree of the Ministry of Finance, Ministry of Construction and Chief Arbiter of the Czechoslovak Socialist Republic No. 177 / 1960 Coll.
Declaration on material interest in the production of type-supporting documents
Valid
Effective from 01.01.1961
177
DECLARATION
Ministry of Finance, Ministry of Construction and Chief Arbiter of the Czechoslovak Socialist Republic
of 14 November 1960
on material involvement in the production of type-based materials
The Ministry of Finance pursuant to Article 11 (1) and (4) of Act No. 83 / 1958 Coll., on the Financial Planning and Financial Management of National Enterprises and other Economic Organisations of the State Socialist Sector, and pursuant to § 20 (1) (a) of Act No. 8 / 1959 Coll., laying down the basic rules on State Budget and Management of Budgetary Funds, the Ministry of Construction pursuant to § 2 (3) of Government Decree No. 1 / 1956 Coll., as amended by Government Decree No. 52 / 1960 Coll., on the abolition of the State Committee on Construction, and the Central Arbiter of the Czechoslovak Socialist Republic pursuant to § 190 of Law No. 69 / 1958 Coll., on Economic Relations between Socialist Organisations, provides:
INTRODUCTORY PROVISIONS
Purpose
Widely developed and consistent typing is an important step forward towards increasing the economic efficiency of investment and industrial construction, with the aim of shortening deadlines and making building preparation and implementation more economical; In order to achieve such typing, organisations involved in the production of type materials must be involved materially.
Subject matter and scope of the adjustment
(1) This Decree provides for the conclusion of economic contracts on type-based work *) between national organisations and lays down the principles for the award of remuneration to suppliers of such material as well as to their subcontractors or special organisations whose involvement in the processing of type-based material results from their competence (hereinafter the "special organisations') and the principles for the use of such remuneration.
(2) This Decree applies only to national and regional basic and complete type materials and their variants, having all the required requirements and if they are drawn up, discussed, approved and declared in accordance with the applicable rules. * *) It also applies to model projects, * * *) if they have the same requirements as type documents and are also discussed, approved and declared in the same way.
(3) Specific rules apply to remuneration for improving valid type materials. *)
CONTRACTING SECURITY
Contractual relations
(1) The work on the type documentation is ensured by an economic contract. * *)
(2) The contract draft shall be transmitted by the customer to the supplier of the type of material.
(3) In the case of national type files, the collector is the central body, the regional type files and regional variations are the national committee.
(4) The supplier of the type background (model project) is a state organisation authorised under the relevant regulations * * *) to produce type material ("supplier").
Content of the contract
In the draft contract, the buyer shall indicate his requirements and conditions, in particular the time of performance, the amount of the remuneration and whether the basic, complete type base or model project is to be drawn up.
Document for conclusion of contract
The basis for the conclusion of a contract for drawing up:
(a) the basic type base is an approved typing task;
(b) the complete type base is an approved basic type base, or an approved typing task if the type base is developed in one phase, †)
(c) the model project is an approved dossier equivalent to a typical task.
REVENUE AND USE
A. Remuneration
Entitlement to remuneration
(1) The supplier of the basic type-basis shall be entitled to remuneration if the type-approval of the typical task or the type-approval has so far been:
(a) reduced investment costs; or
(b) improved additional qualitative technical economic indicators such as reduced own costs of future annual production (operation), reduced workmanship, reduced consumption of deficit building materials, reduced weight of construction structures.
If the supplier achieves an improvement in both the indicators referred to in (a) and (b), he shall be entitled to both remuneration.
(2) The supplier of the complete type base shall be entitled to remuneration if they have been against an approved basic type base, or an approved typical task (if the type background is developed in one phase):
(a) reduced investment costs; or
(b) improved additional qualitative technical economic indicators such as reduced own costs of future annual production (operation), reduced workmanship, reduced consumption of deficit building materials, reduced weight of construction structures.
If the supplier achieves an improvement in both the indicators referred to in (a) and (b), he shall be entitled to both remuneration.
(3) The supplier is entitled to a remuneration even if at least one of the indicators (paragraphs 1 and 2) has been improved while maintaining the other indicators or if one of the indicators (paragraphs 1 and 2) has been improved, but if the overall higher efficiency of the type base has been demonstrated.
(4) The subcontractors and special organisations referred to in Paragraph 2 (1) shall be entitled to part of their remuneration against the supplier, to the extent that they share an improvement in the production of the type base, if the proposed improvement has been accepted.
(5) Approval † †) of the type base must be decided by the competent authority within 40 days of its submission for approval.
(6) The authorising authority shall decide on the supplier's entitlement to the remuneration and on the right of subcontractors and special organisations to participate in the remuneration within 14 days of the type-approval of the type-support; the remuneration and share of the remuneration must be shown within seven days of this decision.
Basis for calculating remuneration for the base type base
(1) The remuneration referred to in Article 6 (1) (a) is calculated from the savings, which is the difference between the sales price in the type of material still in force and the sales price limit in the basic type of material supplied. If there is no type base, the savings shall be calculated from the difference between the indicative cost in the typical task and the limit. The basis for calculating the remuneration shall be no more than 10% of the savings achieved.
(2) The remuneration provided for in Article 6 (1) (b) is calculated on the basis of savings, which is the difference between the costs in the basic type of the material supplied and the costs in the type of material still in force. If there is no type base, the savings shall be calculated from the difference between the costs in the base type base and the indicative costs of the typical task. The basis for calculating the remuneration shall be no more than 10% of the savings achieved. If it is not possible to calculate the savings (if it is not possible to quantify the improvement in indicators), the remuneration shall not exceed 15% of the price for the production of the basic type base.
(3) Before calculating the remuneration, the calculated savings should be adjusted in such a way as to exclude any improvements that have not been earned by the supplier, subcontractor or special organisation.
Basis for calculation of remuneration for complete type base
(1) The remuneration referred to in Article 6 (2) (a) is calculated from the savings, which is the difference between the sales price limit in the base type and the reduced fixed sales price in the full type basis. The basis for calculating the remuneration shall be no more than 25% of the savings achieved.
(2) The remuneration provided for in Article 6 (2) (b) is calculated on the basis of the savings, which is the difference between the costs indicated in the basic type base and the total type base. The basis for calculating the remuneration shall be no more than 25% of the savings achieved; if the improvement of the indicators cannot be quantified, the remuneration shall not exceed 15% of the price for the production of the complete type base.
(3) The remuneration for the complete type base provided, prepared only on the basis of the approved typical task, is calculated from the savings, which is the difference between the indicative cost in the approved typical task and the fixed sales price in the produced full type basis. The basis for calculating the remuneration shall be no more than 10% of the savings achieved; if the improvement of the indicators cannot be quantified, the remuneration shall not exceed 15% of the price for the production of the complete type base.
(4) Before calculating the remuneration, the calculated savings should be adjusted so as to exclude any improvements that have not been earned by the supplier, subcontractor or special organisation.
Remuneration
(1) The remuneration shall be calculated on the basis (Sections 7 and 8) multiplied by the total authorised number of uses of the type base and a fraction established in accordance with paragraph 2.
(2) The fraction using a type base of not more than 50 uses is 1 / 10. With more use than 50, the denominator of the fraction increases by at least 5 / 10 for each additional 10 uses of the type base.
(3) The authorising authority may, with the approval of the Ministry of Construction and the Ministry of Finance, provide for other fractions, taking into account the social benefits of the type base under the specific conditions of each sector.
(4) In the case of small-volume typing work for mass use in production, the authorising authority may increase remuneration if the Ministry of Construction and the Ministry of Finance so agree.
Limitation of remuneration
The total remuneration shall not exceed the price invoiced by the supplier for the supply of the type of material; the restriction does not apply to the remuneration for the work referred to in Paragraph 9 (4).
Amount of remuneration shares
Subcontractors and special organisations shall be entitled to a share of the appropriate improvements proposed by the processor; the proportionality of the share shall be assessed by the institution determining the entitlement to the share.
Resources of payments
(1) Specific regulations *) provide for the sources from which the buyer pays the invoice to the supplier for the type base or model project supplied.
(2) The remuneration is provided by the buyer of the "Miscellaneous financial costs" item composition of the expenditure.
Proceedings on remuneration
(1) The supplier's remuneration and share of the remuneration shall be determined by the competent authority to approve * *) the type base * * *), taking into account the cost reduction and improved efficiency achieved.
(2) Whether the conditions for entitlement to remuneration (share) have been fulfilled must be indicated in the note on the receipt of the type base.
B. Use of remuneration and shares
The supplier shall, after paying the shares to subcontractors and special organisations, apply the remuneration to its employees in accordance with § 15 and 16.
(1) The supplier shall use 20% of the remuneration for the payment of premiums and remuneration under the applicable rules to its employees. The State Planning Institute and Regional Design Institute will use 25% of the remuneration for this purpose.
(2) The amount calculated in accordance with paragraph 1 shall be transferred by the supplier,
(a) if it is an economic organisation with a premium fund, to that fund;
(b) if it is an economic organisation without a premium fund, the remuneration fund shall be set up separately for that purpose. The fund is held in a special account with the Czechoslovak State Bank. The remuneration charged by this fund shall form part of the wage fund; these fees may be exceeded by the organisation's wage fund;
(c) where it is a special budgetary organisation, the remuneration to the Fund shall be set up for that purpose separately. The remuneration charged by this fund shall form part of the wage fund; these fees may be exceeded by the organisation's wage fund;
(d) if it is a budgetary organisation, budget revenue. The payment of remuneration and allowances to workers shall be made from the wage fund which may be exceeded up to the amount transferred; This provision shall not apply to budgetary organisations whose staff are subject to rules on the provision of one-off exceptional remuneration in the administration. *)
(3) The sum of the amounts transferred pursuant to paragraph 2 may not exceed 1% of the wage fund of the supplier's staff, planned for the year in question, in one calendar year; however, for state and regional project institutes 4% of the said wage fund of the production staff. If the supplier creates resources for the remuneration of workers in accordance with the rules on material interest in investment construction, the sum of the amounts transferred under the rules on material interest in investment construction and under this decree shall not exceed 1,5% and 6% of that wage fund for state and regional project institutes; for special typology institutes where the volume of typology exceeds 80% of the capacity of the institute, it shall not exceed 10% of the wage fund of production workers.
(4) The amounts of premium remuneration and remuneration to workers which have not been exhausted by the end of the calendar year are to be transferred to the years to come.
The remaining part of the remuneration which may not be used for the payment of premiums and staff remuneration shall be transferred by the supplier to the workers' farm fund (incentive fund). If no such fund is set up with the supplier, the annual comprehensive analysis shall decide on the use of this part of the remuneration, according to the principles on the use of the funds of the farm funds of the workers.
The use of shares paid to subcontractors and special organisations is subject to the provisions of § 14 to 16 mutatis mutandis.
PROVISIONS FINAL
Authorisation of exemptions
The Ministry of Construction and the Ministry of Finance may allow exemptions from the provisions of Part Three of this Order.
Efficacy
This decree shall take effect on 1 January 1961 and shall cover the type of documents to be supplied after that date under the contract.
Deputy Minister of Finance:
Riesling Rev.
Deputy Minister of Construction:
Toman v. r.
Deputy Chief Arbiter of CSSR:
Brandeys v. r.
*) The type base is the project and budget documentation of the technical work of a locally undetermined work or part of it, the components of structures for mass-repeated construction, which is processed in accordance with the guidelines of the State Building Committee of 11 April 1959 on type-design, approved by the central authority and published in the inventory of valid type-materials; It is generally processed in two stages (basic type base: with sales price limit and as full type base: fixed sales price).
* *) State Building Committee Directive of 11 April 1959 on Type Design (JHA book No 62) - hereinafter referred to as "the Directive '; ČSN 730006 Directive on dimensional unification.
* * *) The model project is a project and budget documentation of an object or construction locally undetermined, processed with the intention of several repetitions in construction, processed according to the principles of typing and compliance with dimensional unification with the maximum application of industrial parts and standardised structures, approved by the central authority and published in the overview of valid type materials.
*) Act No. 34 / 1957 Coll., on inventions, discoveries and improvements and its implementing regulations.
* *) § § 152 et seq. of Act No. 69 / 1958 Coll., on Economic Relations between Socialist Organisations.
Point 79 of the Guidelines.
(†) Point 18 of the Guidelines. ČSN 730006 Directive on dimensional unification.
† †) Article VII of the Guidelines; ČSN 730006 Directive on dimensional unification.
*) Article 4 (2) (d) of Part B of the Directives of the Ministry of Finance No 117 / 35,000 / 60, published in the Bulletin of the Ministry of Finance No 13-14 / 60.
Article VII of the Guidelines.
* * *) In determining the percentage according to § § § 7 and § 8 and in determining the increase in the denominator pursuant to § § 9 (2), the authorising authority shall take into account that the supplier is involved in the acquisition of the type base at the lowest cost.
*) Government Order No 711 / 1959.
Sign in for notes, favorites and notifications
Regulation Information
| Citation | Decree of the Ministry of Finance, Ministry of Construction and Chief Arbiter of the Czechoslovak Socialist Republic No. 177 / 1960 Coll., on material interest in the production of type materials |
|---|---|
| Regulation Type | - |
| Author | - |
| Collection | Code of Laws |
| Date of Promulgation | 15.12.1960 |
|---|---|
| Effective from | 01.01.1961 |
| Effective until | - |
| Status | Valid |
The regulation text is for informational purposes only.
Comments 0