Decree No. 169 / 2023 Coll.
Ordinance on the determination of conditions at which solid fuel from waste ceases to be waste
Valid
Order
Effective from 17.06.2023
Text versions:
17.06.2023
16.06.2023
169
DECLARATION
of 8 June 2023
laying down conditions for the cessation of solid waste fuel
The Ministry of the Environment and the Ministry of Industry and Trade provide, pursuant to § 9 (7), § 15 (5) (a) and § 94 (2) of Act No. 541 / 2020 Coll., on Waste, hereinafter referred to as "the Act":
Subject matter
This decree implements the relevant provisions of the European Union1) and provides for:
(a) solid fuel from waste which ceases to be waste;
(b) the moment when solid fuel from waste ceases to be waste;
(c) the specific purpose for which solid fuel from waste may be used;
(d) requirements for waste entering the recovery process which produces solid fuel from waste;
(e) the waste treatment process in the recovery process during which solid fuel is generated from waste;
(f) qualitative criteria to be met by solid fuel from waste in order to stop being waste;
(g) sampling and testing requirements;
(h) particulars of accompanying documentation;
(i) certain information requirements on waste which is transferred to a waste recovery facility in which solid fuel is produced from waste and the producer of such waste; and
(j) certain requirements for keeping a continuous waste management record at a recovery facility where solid fuel is produced from waste.
Solid fuel from waste
(K § 9 (7) of the Act)
(1) Solid fuel from waste ceases to be waste if:
(a) is manufactured only from other waste which cannot be disposed of in a more appropriate manner in accordance with the waste management hierarchy and which at the same time satisfy the conditions for placing on the market under Regulation (EU) 2019 / 1021 of the European Parliament and of the Council of 20 June 2019 on persistent organic pollutants;
(b) meets the requirements for solid alternative fuel for one of the classes specified in technical standard CSN EN ISO 21640 Solid alternative fuels - Specifications and classes;
(c) it is produced in a stationary waste recovery facility operated on the basis of a permit for the operation of an installation pursuant to Article 21 (2) of the Act and in accordance with standard ČSN EN 15358 Solid Alternative fuels - Quality Management Systems - Specific requirements for their use in the production of solid alternative fuels;
(d) the waste recovery facility referred to in (c) shall be transferred to a combustion stationary source with a total rated thermal input of more than 20 MW, to a waste incineration plant or to a rotary furnace for the production of cement clinker or rotary, shaft or other lime kilns in which energy recovery is made and which meet the following conditions:
1. are operated on the territory of the Czech Republic,
2. are specifically defined in the accompanying documentation of solid fuel from waste;
3. they are operated in accordance with an operating permit issued for the heat treatment of waste in a stationary source listed in Annex 2 to the Act on the Protection of Asphyxias (2) or an integrated authorisation issued under the Integrated Prevention Act (3) replacing it; and
4. are part of a project subject to a permit under the Building Act (4),
(e) for energy use in stationary sources as referred to in point (d), the same requirements as those laid down in the Act on the Protection of Aids (5) and the Integrated Prevention Act (3), including requirements on best available techniques (6), as if heat treatment of waste were taking place; and
(f) is specifically defined as input material in the authorisation of the operation of a stationary source referred to in point (d) in which it will be used.
(2) Solid fuel from waste ceases to be waste at the time of the physical removal to the establishment of a stationary source referred to in paragraph 1 (d).
Waste biomass fuel
(K § 9 (7) of the Act)
(1) The conditions on the basis of which solid waste fuel ceases to be waste pursuant to Article 2 shall not apply to solid waste fuel produced from waste biomass ("waste biomass fuel").
(2) Waste biomass fuel ceases to be waste if:
(a) is produced only from other wastes as defined in Table 1.1 of Annex 1 to this Decree which cannot be handled in a more appropriate manner in accordance with the waste hierarchy;
(b) meets the definition of biomass for combustion in stationary sources and the requirements for burning it pursuant to Decree No. 415 / 2012 Coll., on the permissible level of pollution and its detection and on the implementation of certain other provisions of the Air Protection Act, as amended;
(c) meet the maximum permitted level of pollutants set out in Table 1.2 of Annex 1 to this Regulation, while respecting the range of determined polycyclic aromatic hydrocarbons set out in Table 1.3 of Annex 1 to this Regulation; these values must not be achieved by dilution,
(d) it is manufactured in a stationary waste recovery facility operated on the basis of an installation permit pursuant to Article 21 (2) of the Act and in accordance with the standard EN 15358 Solid alternative fuels - Quality Management Systems - Specific requirements for their use in the production of solid alternative fuels; and
(e) the waste recovery facility referred to in point (d) shall be transferred to a combustion stationary source with a total rated thermal input of more than 5 MW in which energy recovery is made and which fulfils the following conditions:
1. is operated on the territory of the Czech Republic,
2. is specifically defined in the accompanying documentation of waste biomass fuel;
3. it is operated in accordance with an operating permit issued for a stationary source listed in Annex 2 to the Act on the Protection of Asphyxias 2) or an integrated permit issued under the Integrated Prevention Act 3) which replaces it; and
4. is part of a project subject to a permit under the Building Act (4).
(3) Where waste biomass fuel is produced only from waste as defined in Table 1.4 of Annex 1 to this Decree, which are non-polluted plant material, compliance with the criterion in paragraph 2 (b). (c) not required.
(4) Waste biomass fuel ceases to be waste at the time of the physical take-over to the establishment of a stationary source referred to in paragraph 2 (e).
Supporting documentation
(K § 9 (7) of the Act)
The contents of the solid fuel accompanying documentation from waste which must be provided by each individual delivery at the latest at the time of exit from the installation in which it is produced are set out in Tables 2.1 and 2.2 of Annex 2 to this Decree. The accompanying documentation shall also include data for the specification of solid alternative fuels as set out in Annex A to technical standard ČSN EN ISO 21640 Solid alternative fuels - Specifications and classes.
Waste data
[Paragraph 15 (5) (a) of the Law]
(1) The data on waste which is transferred to a waste recovery facility for the production of solid fuel from waste pursuant to Article 2 must include data on the producer of waste and on the origin of the waste, on the grounds that the waste is deemed to meet the conditions for placing on the market under Regulation (EU) 2019 / 1021 of the European Parliament and of the Council. Where it is not possible to demonstrate on the basis of data on the origin of waste that the waste will meet the conditions for placing on the market under Regulation (EU) 2019 / 1021 of the European Parliament and of the Council, data on the content of persistent organic pollutants, the content of which cannot be excluded, including sampling and testing protocols or copies thereof, shall be included.
(2) Part of the waste data transmitted to the waste recovery facility for the production of solid fuel from waste pursuant to § 2 or 3 is a justification why waste cannot be disposed of in another way in accordance with the waste hierarchy.
Interim registration
(Paragraph 94 (2) of the Law)
The continuous record of waste of the waste operator of the recovery facility from which solid fuels are removed from the waste pursuant to § 2 or 3 shall, for each recorded data on the production of solid fuel from the waste, include a unique delivery identification number and a copy of the relevant accompanying documentation. Each record of the production of solid fuel from waste referred to in § 2 or 3 shall be accompanied by a document issued by the operator of the stationary source confirming receipt of the supply and containing a clear identification of the stationary source in which the solid fuel from the waste is recovered, a unique delivery identification number and the fuel mass delivered in the supply.
Sampling and testing requirements
(K § 9 (7) of the Act)
The sampling and testing requirements for verifying compliance with the requirements for solid alternative fuel of one of the classes according to technical standard ČSN EN ISO 21640 Solid alternative fuels - Specifications and classes and for verifying compliance with the criteria referred to in § 3 (2) (c) are set out in Annex 3 to this Decree.
Notification of technical regulation
This Decree was notified in accordance with Directive (EU) 2015 / 1535 of the European Parliament and of the Council of 9 September 2015 laying down a procedure for the provision of information in the field of technical and information society services.
Transitional provisions
(1) By 31 December 2023, the requirements of this Decree shall not apply to solid fuel from waste, including waste biomass, which is produced exclusively from other waste and has ceased to be waste in accordance with § 154 (5) or 156 (5) of the Act.
(2) Until 31 December 2024, the requirements of this Decree shall not apply to waste biomass fuel produced exclusively from other waste for which an authorisation has been granted pursuant to Article 10 (1) of the Act before the date of entry into force of this Decree.
Efficacy
This Decree shall take effect on the day following that of its publication.
Minister of Environment:
Mgr.
Minister for Industry and Trade:
Ing. Síkela v. r.
Příloha č. 1
Annex No 1 to Decree No 169 / 2023 Coll.
Requirements for waste biomass fuel
Table 1.1
List of catalogue numbers of other wastes for the production of waste biomass fuel
| 02 01 03 Odpad rostlinných pletiv |
| 02 01 07 Odpady z lesnictví |
| 03 01 01 Odpadní kůra a korek |
| 03 01 05 Piliny, hobliny, odřezky, dřevo, dřevotřískové desky a dýhy, neuvedené pod číslem 03 01 04 |
| 03 03 01 Odpadní kůra a dřevo |
| 15 01 03 Dřevěné obaly |
| 17 02 01 Dřevo |
| 19 12 07 Dřevo neuvedené pod číslem 19 12 06 |
| 20 01 38 Dřevo neuvedené pod číslem 20 01 37 |
Table 1.2
Maximum permitted content of pollutants in waste biomass fuel
| Parametr | Mezní hodnoty (mg/kg sušiny) | |
|---|---|---|
| Medián | 80. percentil | |
| Arzén (As) | 1,2 | 1,8 |
| Fluór (F) | 15 | 20 |
| Chlór (Cl) | 250 | 300 |
| Chrom (Cr) | 10 | 15 |
| Kadmium (Cd) | 0,8 | 1,2 |
| Olovo (Pb) | 10 | 15 |
| Celkový součet PAU podle tabulky č. 1.3 | 2 | 3 |
| Rtuť (Hg) | 0,05 | 0,075 |
| Zinek (Zn) | 140 | 210 |
Table 1.3
The range of determined polycyclic aromatic hydrocarbons (PAHs):
| Název | CAS |
|---|---|
| Anthracen | 120-12-7 |
| Benzo(a)anthracen (BaA) | 56-55-3 |
| Benzo(a)pyren (BaP) | 50-32-8 |
| Benzo(b)fluoranten (BpFA) | 205-99-2 |
| Benzo(g,h,i)perylen | 191-24-2 |
| Benzo(k)fluoranten | 207-08-9 |
| Fenanthren | 85-1-8 |
| Fluoranthen | 206-44-0 |
| Chrysen | 218-01-9 |
| Indeno[1,2,3-cd]pyren | 193-39-5 |
| Naftalen | 91-20-3 |
| Pyren | 129-00-0 |
Table 1.4
Wastes which are not monitored for compliance with the criterion in Section 3 (2) (c) when producing biomass fuel
1) In the case of plant material not contaminated by chemicals.
Příloha č. 2
Annex No 2 to Decree No 169 / 2023 Coll.
Contents of accompanying documentation
Table 2.1 Supporting documentation of solid fuel from waste pursuant to § 2
| Identifikace výrobce tuhého paliva z odpadu | |||
|---|---|---|---|
| Název | |||
| Adresa | |||
| IČO | |||
| IČZ | PID (IPPC) | ||
| Kontakt na odpovědnou osobu (telefon, e-mail) | |||
| Identifikace stacionárního zdroje využívajícího tuhé palivo z odpadu | |||
| Název | |||
| Adresa | |||
| IČO | |||
| IČP/IČZ | PID (IPPC) | ||
| Identifikace jednotlivých stacionárních zdrojů, v kterých se tuhé palivo z odpadu využije (označení kotle či zdroje) | |||
| Kontakt na odpovědnou osobu (telefon, e-mail) | |||
| Identifikace tuhého paliva z odpadu | |||
| Název paliva | |||
| Identifikační číslo dodávky paliva | |||
| Období odebrání dodávky | |||
| Hmotnost dodávky paliva | |||
| Vlastnosti tuhého paliva z odpadu | |||
| Původ (výčet katalogových čísel odpadu, ze kterých bylo palivo vyrobeno) | |||
| Specifikace podle technických norem | |||
Table 2.2 Supporting documentation of waste biomass fuel pursuant to § 3
| Identifikace výrobce paliva z odpadní biomasy | |||||
|---|---|---|---|---|---|
| Název | |||||
| Adresa | |||||
| IČO | |||||
| IČZ | PID (IPPC) | ||||
| Kontakt na zodpovědnou osobu (telefon, e-mail) | |||||
| Identifikace spalovacího stacionárního zdroje využívajícího palivo z odpadní biomasy | |||||
| Název | |||||
| Adresa | |||||
| IČO | |||||
| IČP/IČZ | PID (IPPC) | ||||
| Identifikace jednotlivých spalovacích stacionárních zdrojů, v kterých se | |||||
| Kontakt na odpovědnou osobu (telefon, e-mail) | |||||
| Identifikace paliva z odpadní biomasy | |||||
| Identifikační číslo dodávky paliva | |||||
| Období odebrání dodávky | |||||
| Hmotnost dodávky paliva | |||||
| Vlastnosti paliva z odpadní biomasy | |||||
| Původ (výčet katalogových čísel odpadu, ze kterých bylo palivo vyrobeno) | |||||
| Kritérium | Jednotka | Průměr | Limit průměr | ||
| Sleduje se obsah škodlivin | Ano – uvedou se hodnoty níže | Ne – hodnoty uvedené níže se v souladu s § 3 odst. 3 neuvádějí | |||
| Kritérium | Jednotka | Medián | 80. percentil | Limit medián | Limit 80. percentil |
| Arzén (As) | mg/kg | 1,2 | 1,8 | ||
| Fluór (F) | mg/kg | 15 | 20 | ||
| Chlór (Cl) | mg/kg | 250 | 300 | ||
| Chrom (Cr) | mg/kg | 10 | 15 | ||
| Kadmium (Cd) | mg/kg | 0,8 | 1,2 | ||
| Olovo (Pb) | mg/kg | 10 | 15 | ||
| PAU | mg/kg | 2 | 3 | ||
| Rtuť (Hg) | mg/kg | 0,05 | 0,075 | ||
| Zinek (Zn) | mg/kg | 140 | 210 | ||
| Specifikace podle technických norem | |||||
Příloha č. 3
Annex 3 to Decree No 169 / 2023 Coll.
Sampling and testing requirements
1. In the case of solid fuel from waste referred to in Section 2, sampling shall be carried out according to the requirements of technical standard CSN EN ISO 21645 Solid alternative fuels - sampling methods and, in the case of waste biomass fuel, according to the requirements of technical standard CSN EN ISO 18135 Solid biofuels - Sampling.
2. The operator of a recovery facility in which solid fuel is produced from waste pursuant to § 2 or 3 shall keep all laboratory samples for 36 months. The samples must be marked in such a way as to indicate the period from which the dose to which the sample belongs comes. The samples may be dried at a temperature not exceeding 40 ° C.
3. Methods for measuring calorific value, chlorine content and other substances monitored according to technical standard ČSN EN ISO 21640 Solid alternative fuels - Specifications and classes or according to Table 1.2 of Annex 1 to this Decree are given in Table 3.1.
Table 3.1 Methods for measuring the performance of solid fuel from waste pursuant to § 2 or 3
| Technický předpis |
|---|
| ČSN EN ISO 21654 Tuhá alternativní paliva – stanovení spalného tepla a výhřevnosti |
| ČSN EN 15408 Tuhá alternativní paliva – Metody stanovení obsahu síry (S), chloru (Cl), fluoru (F) a bromu (Br) |
| ČSN EN 15411 Tuhá alternativní paliva – Metody stanovení obsahu stopových prvků (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V a Zn) |
| ČSN EN ISO 16994 Tuhá biopaliva – Stanovení obsahu celkové síry a celkového chloru |
| ČSN EN ISO 16948 Tuhá biopaliva – Stanovení obsahu celkového uhlíku, vodíku a dusíku |
| ČSN EN ISO 16967 Tuhá biopaliva – Stanovení majoritních prvků – Al, Ca, Fe, Mg, P, K, Si, Na a Ti |
| ČSN EN ISO 16968 Tuhá biopaliva – Stanovení stopových prvků |
| ČSN EN 17503 Půdy, kaly, upravený bioodpad a odpady – Stanovení polycyklických aromatických uhlovodíků (PAH) plynovou chromatografií (GC) a vysokoúčinnou kapalinovou chromatografií (HPLC) |
1) Directive 2008 / 98 / EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives. Directive (EU) 2018 / 851 of the European Parliament and of the Council of 30 May 2018 amending Directive 2008 / 98 / EC on waste.
2) Act No. 201 / 2012 Coll., on Air Protection, as amended.
3) Act No. 76 / 2002 Coll., on integrated pollution prevention and control, on integrated pollution register and on amending certain laws (Integrated Prevention Act), as amended.
4) Act No. 283 / 2021 Coll., Construction Act, as amended.
5) Act No. 201 / 2012 Coll., on Air Protection, as amended. Decree No. 415 / 2012 Coll., on the permissible level of pollution and its detection and implementation of certain other provisions of the Air Protection Act, as amended.
(6) Commission Implementing Decision (EU) 2021 / 2326 of 30 November 2021 establishing best available techniques (BAT) conclusions pursuant to Directive 2010 / 75 / EU of the European Parliament and of the Council for large combustion plants. Commission Implementing Decision (EU) 2019 / 2010 of 12 November 2019 establishing conclusions on best available techniques (BAT) for waste incineration pursuant to Directive 2010 / 75 / EU of the European Parliament and of the Council. Commission Implementing Decision 2013 / 163 / EU of 26 March 2013 establishing best available techniques (BAT) conclusions pursuant to Directive 2010 / 75 / EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide.
Sign in for notes, favorites and notifications
Regulation Information
| Citation | Decree No. 169 / 2023 Coll., laying down the conditions under which solid fuel from waste ceases to be waste |
|---|---|
| Regulation Type | Order |
| Author | - |
| Collection | Code of Laws |
| Date of Promulgation | 16.06.2023 |
|---|---|
| Effective from | 17.06.2023 |
| Effective until | - |
| Status | Valid |
Public Contracts 5
Smlouva o dílo - ,,Vzorkování a zkoušení odpadů, výrobků z odpadů, odpadních vod, povrchových a podz...
Ústecký kraj
ALS Czech Republic, s.r.o.
1 037 819 CZK
16.12.2025
Zajištění sponzorovaného přístupu k českým technickým normám a jiným technickým dokumentům za Minist...
Česká republika - Ministerstvo životního prostředí
Česká agentura pro standardizaci
18 240 000 CZK
03.12.2025
Notifications
Smlouva na dopravu
OZO Ostrava s.r.o.
Veolia Vedlejší produkty ČR, s.r.o.
25.02.2025
Notifications
Zajištění sponzorovaného přístupu k českým technickým normám a jiným technickým dokumentům za Minist...
Česká republika - Ministerstvo životního prostředí
Česká agentura pro standardizaci, státní příspěvko...
18 240 000 CZK
28.11.2024
Notifications
Dodatek č.1 BIO Smlouva o nakládání s komunálním odpadem ve městě Šumperk
Město Šumperk
Recovera Využití zdrojů a.s.
18.01.2022
Notifications
Source:
Hlídač státu
(CC BY 3.0 CZ)
The regulation text is for informational purposes only.
Comments 0