Decree No. 142 / 2004 Coll.
Decree amending Decree No. 26 / 1989 Coll., on safety and health at work and safety at operation in mining and mining activities on the surface, as amended
Valid
Order
Effective from 01.07.2004
Text versions:
01.07.2004
31.03.2004
142
DECLARATION
of 19 March 2004
amending Decree No. 26 / 1989 Coll., on safety and health at work and safety at operation in mining and surface mining activities, as amended
The Czech Mining Authority provides pursuant to Sections 5 (3) and 6 (6) (a) of Act No. 61 / 1988 Coll., on Mining Activities, Explosives and State Mining Administration, as amended by Act No. 542 / 1991 Coll.:
Decree No. 26 / 1989 Coll., on safety and health at work and safety at the operation of mining activities and in the activity carried out on the surface by mining, as amended by Decree No. 340 / 1992 Coll., Decree No. 8 / 1994 Coll., Decree No. 236 / 1998 Coll. and Decree No. 434 / 2000 Coll., are amended as follows:
1. In Article 1 (1), the words "in accordance with the law of the European Communities (1a) 'shall be inserted after the words" laid down'.
Footnote (1a):
"(1a) Council Directive 92 / 104 / EEC on minimum requirements for improving the safety and health of workers in the surface and deep mining industry."
2. in Article 2 (1) (a) and (b):
'(a) the burden of excessive weight on an article weighing more than 3000 kg;
(b) the burden of excessive dimensions of an object whose transport or handling is not possible to meet the road gaps laid down in this Decree; ';
3. Paragraph 71 (2) reads as follows:
"(2) Automatically or remotely operated equipment is also equipped with manual control, with manual control of the essential (main) movement of the machine sufficient for large machines. For manual control, automatic or remote control is disabled. At the point of remote control, blocking will be ensured to prevent the device from unintended operation. If a change in control settings can give rise to a condition that endangers the safety of work and operation, this shall be avoided by appropriate means, which are usually an access code or a lockable control. ';
4. Paragraph 89 (4) (f) is deleted.
Point (g) shall be renumbered as point (f).
5.Paragraph 90 (1), including footnote 32a, reads as follows:
"(1) The organisation shall designate for each quarry operated with an electrical installation for the control of the assembly, operation and maintenance of electrical equipment a person who, in addition to the qualification requirements of the special legislature32a) has, for coal-mining organisations, at least a full secondary technical training course obtained in the master's study programme in the field of technical sciences and technology and for other organisations.
32a) § 9 (6) of Decree No 75 / 2002 Coll., on the safety of the operation of electrical technical equipment used in mining and mining activities. '
6.
Transport loads of excessive weight or loads of excessive dimensions
(1) The transport and handling of excessive weight or weight loads by hand or skid shall be carried out only by personnel with at least two years of transport experience, according to the processed operational documentation approved by the factory quarry. That mode of transport may be carried out only in the presence of technical supervision.
(2) Machinery carrying the burden of excessive weight or the burden of excessive dimensions according to the transport rules approved by the quarry may be carried out only by workers with at least two years' experience in transport.
(3) Before handling and transporting the burden of excessive weight or burden of excessive dimensions, the designated worker shall examine the equipment intended to handle and transport the burden of excessive weight or burden of excessive dimensions, whether it corresponds to the operational documentation and not damaged. The result will be recorded.
(4) Before transporting the load of excessive weight or the load of excessive dimensions, the designated worker shall carry out a transit check. The result of the check will be recorded.
(5) The operational documentation referred to in paragraph 1 and the transport rules referred to in paragraph 2 shall contain conclusions from the assessment of the transport load of excessive weight or load of excessive dimensions and elements of the road, in particular from the point of view of the loading capacity of the ground used for transport as a means of transport, the inclination of the road, the weight and dimensions of the load, the stability of the load with regard to the location of its centre of gravity during transport, the assessment of the required loading area of the means of transport and the method of fixing the load, to such an extent as to prevent the undesirable movement of the load, tipping or overturning.
(6) Where transport and handling of excessive weight or excessive size loads are carried out, no other activity shall be carried out. ';
This Decree shall take effect on 1 July 2004.
Chairman:
Prof. JUDr. Makarius, CSc.
Sign in for notes, favorites and notifications
Regulation Information
| Citation | Decree No. 142 / 2004 Coll., amending Decree No. 26 / 1989 Coll., on safety and health at work and safety at operation in mining and surface mining activities, as amended |
|---|---|
| Regulation Type | Order |
| Author | - |
| Collection | Code of Laws |
| Date of Promulgation | 31.03.2004 |
|---|---|
| Effective from | 01.07.2004 |
| Effective until | - |
| Status | Valid |
The regulation text is for informational purposes only.
Comments 0